The Casing Swage is an economical method to swage or open collapsed casing. The tool is also used to make a swage run prior to running a production tool to make sure the casing I.D. is clear.
The tool has a long tapered nose which leads the tool through the damaged or collapsed section, and a tapered heel that leads back through the tight spot on retrieving the tool. Generous circulation slots are provided. In certain instances it may be necessary to run a succession of swages, each larger than the previous one, so as to gradually force the casing back to its original I.D.
The tool is usually run with a safety joint, drill collars, bumper subs and jars. Swages are available for all sizes of casing and tubing.
Specifications | |||||
型號 | 外形尺寸（mm） | 接頭螺紋 | 使用規(guī)范及性能參數(shù) | ||
整形尺寸分段（mm） | 適用套管（mm） | 整形率（%） | |||
ZQ-114 | D×250 | NC26 | 92、94、96、98、100 | 114.3 | 98-99 |
ZQ-127 | D×300 | NC31（210） | 102、104、106、108、110、112 | 127 | 98-99 |
2 7/8REG | |||||
ZQ-140 | D×300 | NC31 | 114、116、118、120、122、124 | 139.7 | 98-99 |
ZQ-168 | D×350 | NC31（210） | 140、142、144、146、148、150、152 | 168.28 | 98-99 |
NC38（310） | |||||
ZQ-178 | D×400 | NC38(310) | 154、156、158、160、162 | 177.8 | 98-91 |
