Junk Mill Type PMX can be divided into three kinds: flat-bottom (or concave-bottom) milling shoe, guide milling shoe and cone milling shoe, according to its structure and shape. At the milling surface, the carbide particles are built up by welding, which plays a part of self-milling. It is used to mill the fallen substances, such as tooth wheel, slipdog, fittings for deep- well pump, etc. with the advantages of anti impact and longer service life.
Specifications | |||
型號 | 外徑 | 接頭螺紋 | 總長 |
PMX80C-2A30 | 80(3 1/8) | 2 3/8REG | 300(11 3/4) |
PMX89C- 2A30 | 89(3 1/2) | 2 3/8REG | 500( 9 5/8) |
PMX92C- NC23 | 92(3 5/8) | NC23 | 500(19 5/8) |
PMX102C-210 | 102(4) | NC31 | 500(19 5/8) |
PMX108C- 2A10 | 108(4 1/4) | NC26 | 500(19 5/8) |
PMX114C-210 | 114(4 1/2) | NC31 | 500(19 5/8) |
PMX146C- 310 | 146(5 3/4) | NC38 | 500(19 5/8) |
PMX159C - 310 | 159(6 1/4) | NC38 | 500(19 5/8) |
PMX190C - 410 | 190(7 1/2) | NC50 | 500(19 5/8) |
PMX203C- 410 | 203(8) | NC50 | 500(19 5/8) |
PMX292C-630 | 292(11 1/2) | 6 5/SREG | 500(19 5/8) |
PMX305C- 630 | 305(12) | 6 5/8REG | 500(19 5/8) |
PMX410C - 730 | 410(16 1/8) | 7 5/BREG | 450(17 5/8) |
PMX425C- 630 | 425(16 3/4) | 6 5/SREG | 500(19 5/8) |
